Servo Motor (Half Metal Gear) MG995 TowerPro Continuous Rotation

MG995 Servo Motor Pinout Configuration
MG995 has three terminals as mentioned in the pin diagram and the function of each pin is given below.

Pin Name Function
1 Signal pin (Orange pin) The PWM signal which states the axis position is given through this pin.
2 VCC (Red pin) Positive power supply for servo motor is given to this pin.
3 Ground(Brown pin) This pin is connected to ground of circuit or power supply.

MG995 Features and Electrical Characteristics
Half metal geared servo
Stable and shockproof double ball bearing design
Fast control response
Constant torque throughout the servo travel range
Excellent holding power
Operating voltage range: 4.8 V to 7.2 V
Stall torque: 9.4kg/cm (4.8v); 11kg/cm (6v)
Operating speed: 0.2 s/60º (4.8 V), 0.16 s/60º (6 V)
Continuous Rotation
Dead band width: 5 μs
Operating temperature range: 0ºC to +55ºC
Current draw at idle: 10mA
No load operating current draw: 170mA
Current at maximum load: 1200mA
Applications
Drones and RC planes
Security camera
Robotics
Solar tracking and positioning
Door locks and safe locks
Hobby projects