Joystick Shield for Arduino

The “NRF24L01” interace has been added.
The “Nokia 5110 LCD” interface has been added.
The bluetooth module interface has been added, Convenient Bluetooth wireless serial communication.
The “I2C” communication interface has been added Compatible with
Operating voltage :3.5v or 5v.
Power:2W.

Specification:
The push buttons are connected to digital pins 2-6; the related pin will be low when a certain button is pressed.
JoystickY-Axis movement will produce a proportional analogue voltage on analogue pin 0, while, Joystick X-Axis movement will produce a analog signal on analog pin 1.
Meanwhile, JoyStick Shield with a cross PS TWO joystick with buttons, there are four round buttons, 2 small buttons. Provides for the joystick and buttons input expansion. On board switches can switch between 3.3V and 5V, can use this model for other 3.3V micro controller platforms, such as STM32.

Pin definition and Rating:KEY Button Define
Pin # KEY
D0(RX) 0 NULL
D1(TX) 1 NULL
D2 2 KEY A
D3 3 KEY B
D4 4 KEY C
D5 5 KEY D
D6 6 KEY E
D7 7 KEY F
D8 8 KEY Down
Nokoia 5110 LCD

Pin # KEY
D9 9 SCLK
D10 10 CSN
D11 11 D/C
D12 12 RST
D13 13 SCE
nRF24L01

Pin # KEY
D9 9 SCE
D10 10 CSN
D11 11 SCK
D12 12 MOSI
D13 13 MISO