Battery Charger/Balancer 80W,5A for Li-Poly, NiCd & NiMH -IMAX-B6


Out of stock


Out of stock


This charger accurately balances and charges Lithium Polymer, LiFe (A123), NiCd and NiMH batteries. It will handle LiPo/LiFe up to 6S and NiMH/NiCd up to 15S and shows individual cell voltage during charge with real time updates throughout the charge cycle.

The intuitive menu system means charging and cycling is an easy process and can be done quickly and accurately either in the field, by using a 12V input such as a car battery, or at home with a 12V power supply.

Bundled with the charger are a number of input and output wires which should satisfy most any charging requirement. This charger has a JST-XH charge plug, which makes it compatible with Zippy, HXT, iMax and any pack with a JST-XH adapter.

Note: A power supply is not included. The DC input jack is not the same as the standard 5.5mm size we use. It has a larger pin diameter. Thankfully, it does come with a barrel jack to alligator clip adapter. – so you can find power supply for it in this category (Click Here)


Operating Voltge Range: DC 10V ~ 20Vdc (more than 5A)
Ni-MH/NiCd cells: 1~15
Li-ion/Poly cells: 1~6
Delta-peak sensitivity (NiMH/NiCd)
Large range of charge currents
Store function, allows safe storage current
Time limit function
Input voltage monitoring (protects car batteries in the field)
Data storage (Store up to 5 packs in memory)
Battery break in and cycling
Input Voltage: 11~18V
Circuit power: Max Charge: 50W / Max Discharge: 5W
Charge Current Range: .1~6.0A
Pb battery voltage: 2~20v
Dimensions: 133x87x33mm
Weight: 277g


Based on 0 reviews

0.0 overall

Be the first to review “Battery Charger/Balancer 80W,5A for Li-Poly, NiCd & NiMH -IMAX-B6”

There are no reviews yet.