Step Up Power Module 3-6V to 400KV


Out of stock


Out of stock

DC 3V-6V bis 400kV 400000V Boost Step-up Power Module High Voltage Generator Pulse Current Test Arc Distance Board

  • input voltage: DC 3 V to 6 V
  • Input current: 2 A – 5 A
  • High pressure type: the type of pulse current
  • Output voltage: 400000 v(Please pay attention to safety)
  • High-pressure discharge distance between 10 mm – 20 mm
  • The output high voltage wire length: 100 mm
  • Input power cord length: 100 mm (the red line is positive)


  • Red and green power connection red line:”+” green line “-“
  • output: From another wire side

Please notice:

the high-voltage module should avoid the use of electricity in high voltage no-load . (Power must be adjusted to a suitable distance to the high-voltage output line, battery capacity is proportional to the distance and the use of the high-pressure arc ( not a voltage as high as possible, you must provide enough current ) . Experimental test of the arc distance from short to long , Do not exceed the maximum arc distance electricity, energy can not be released due to high pressure , can easily damage the module. )

Work: intermittent, continuous work does not allow more than 1 minute and the output side does not allow shorting. Improper voltage and long working hours easily damaged module


Based on 0 reviews

0.0 overall

Be the first to review “Step Up Power Module 3-6V to 400KV”

There are no reviews yet.