STM32 STM32F103C8T6 ARM Cortex M3 Development Board is a small system inspection or experiment (educational) board using STM32F103C8T6 as the main control chipset, which is based on STM8S003F3 Medium-density performance line, 32-bit microcontrollers chip. This chip provides 32/64 Kbytes Flash program memory, to raise performance, robustness and reduce system cost. Any required microcontroller pins are achievable on this board, adopted 2.54mm pitch pin header. This board can be interface with microcontroller via (maximum two) I2C interfaces (SMBus/PMBus), (up to 3) USARTs (ISO 7816 interface, LIN, IrDA capability, modem control), up to two SPIs (18 Mbit/s), CAN interface (2.0B Active), USB 2.0 full-speed interface. This board is equipped with 4 to 16MHz crystal oscillator (factory default is tunned on 8MHz) and a100ma 3.3V voltage regulator. This board supports serial single-wire debugging (SWD) and JTAG interface debugging mode.
This board can be used with learners to learn STM32 microcontroller with ARM Cortex-M3 32-bit core, too. This development board is specialized to make archetype for any application is based on STM32F103C8T6 microcontrollers such as motor drive and application control, medical and handheld equipment, PC peripherals gaming and GPS platforms, and Industrial applications (PLC, inverters, printers, and scanners, Alarm systems, Video intercom, and HVA).
CPU: ARM 32-bit Cortex M3
Operating voltage: 3.3V
IO logic voltage: 3.3V
Digital I/O Pins: 37
Analog Input Pins: 10 (12bits).
Flash Memory: 64KB.
Programmable Clock Speed: 72 MHz (MAX)
Burning times: 10k cycles
On-board SWD interface, and it can be programmed with ST-LINK V2
Immersion gold process, long service life
On-board reset button and power indicator LED
Power supply connector: Micro USB socket
On-board test indicator LED, and the beginners can program to control it
On-board 100ma 3.3V Regulator
Size: 57mm x 24mm
Be the first to review “STM32F103C8T6 32-Bit ARM Development Board”